The PUMPA AutoRain 5″ Automatic Submersible Stainless Steel Pump is suitable for pumping clean or rainwater from tanks, sumps and wells for use in homes and gardens.
The pump is equipped with an integrated control unit that ensures automatic operation of the pump. The control unit automatically controls the switching on and off (ON/OFF) of the pump depending on the water demand of the user and protects the pump against running dry in case of depletion of the water source.

Use

• Rainwater pumping
• Pumping clean water from tanks, sumps, wells
• Pumping of non-aggressive and non-explosive liquid without solid or fibrous impurities in households, gardens
• Irrigation

Equipment and functions

• The pump is equipped with an integrated non-return valve
• The pump is equipped with an integrated control unit
• Protection against dry running
• Thermal protection
• Automatic start and stop of the pump depending on the user’s water demand

Distinctive design features

• Noryl impellers
• 20 m cable with plug
• Version L – version with side suction

Operating conditions

• It is recommended to install a pressure vessel with a minimum capacity of 3 litres to ensure proper operation of the pump.
• The pump is suitable for continuous operation
• The pump can be operated in both vertical and horizontal position
• The pump must not be used for pumping salt water
• A frequency converter must not be connected to the pump
• The pump is only suitable for pumping clean or slightly polluted water and not for domestic waste or water containing solids.
• The minimum dimensions for placement in a manhole are at least 20 x 20 cm.
• The device may be submerged a maximum of 8 m below the water surface.
• Install the pump so that the height between the device and the highest point of use does not exceed 20 metres.