Description
Product description
Submersible 3″ stainless steel pump designed for pumping water from wells, boreholes, tanks or reservoirs. The pump is designed for use in homes and gardens for water supply and irrigation systems.
Application
- Pumping clean water from wells, tanks and reservoirs
- Supplying households
- Irrigation of gardens
Distinctive design features
- Variants without and with switch box
- Emergency check valve
Operating conditions
- The maximum solids content of the pumped medium must not exceed 0,1 %.
- The maximum particle size is 0,2 mm.
- The PH of the pumped liquid must be in the range 6,8 – 8
- The maximum temperature of the pumped liquid shall be 35 °C.
- The maximum immersion depth of the pump shall not exceed 40 metres and shall be installed at least 50 cm from the bottom
- Do not use the pump in swimming pools.
Instructions
=================================================================
Technical Specifications
Maximum flow [l/min]63.30 – 83.30
Maximum head [m]40 – 113
Power output – P2 [kW]0.37 – 1.50
Rated flow [l/m]33.30 – 50
Rated head [m]30 – 90
Delivery port [“]5/4
Pump diameter [“]3
Maximum immersion depth [m]40
Drinking water certificateNO
Maximum current [A]3.10 – 8.40
Maximum liquid temperature [°C]35
Cable length [m]30 – 50
Maximum particle size [mm]0.20
Protection [IP]68
Automatic thermal protectionYES
Dry run protectionNO
Off switchNO
Speed controlNO
Capacitorexternal, integrated
Impeller materialnoryl
Constructionsubmersible
Reviews
There are no reviews yet.